Other

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 30mm (1-1/8") straight steerer tubes - Durable steel construction - Allows the installation of a straight steerer fork without changing out the headset lower

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 52mm lower headset bearings - Compatible with 40mm (1-1/2") tapered steerer tubes - Durable steel construction

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 5 - 60 Durometer, Medium

Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters. - Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series - Integral mold seals keep out the elements - Compatible with 47mm lower headset bearings - Compatible with 33mm (1-1/4") tapered steerer tubes - Lightweight aluminum construction

Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each from Cane Creek.

Replacement top subassemblies are compatible across Cane Creek 110-, 40-, and 10-Series headsets with the same SHIS values. - Bearings not included

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Air Spring Volume Reduction Kit - Cane Creek Kitsuma 5mm Air Stroke/Volume Reducer

Cane Creek crown races are interchangeable between headset series.

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost.

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

Crank Insurance compatible with HollowGram cranks. Features - Protects HollowGram crank arm from rock strikes - Reflective strip keeps riders visible

Get the DownLow. Our DownLow dropper post is an infinitely adjustable, easily serviceable, air/hydraulic unit with a sweet cable remote. It goes up. It goes down. You need one. Where it thrives: Challenging trails, up and down hills What it's built for: Handling, confidence Highlights: - 31.6 diameter - Alloy construction with slot key bushings and wiper seals - Preset airspring for no-fuss setup

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 12mm - Outer Diameter: 24mm - Width: 6mm

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 15mm - Outer Diameter: 24mm - Width: 5mm

All CeramicSpeed Bearings are hand-built in Denmark. Super-smooth CeramicSpeed grade 3 Silicone Nitride balls are matched (within microns) with hardened steel raceways that feature an ultra-smooth polished groove. The balls are held in place by a reinforced polyamide cage. Every bearing is optimized with a low-viscosity CeramicSpeed All Round Grease to minimize friction and increase bearing life. Non-contact seals complete the bearings, keeping dirt and moisture out. CeramicSpeed Bearings can be used for any cycling discipline: Road, TT, Tri, Track, Cross, and MTB. The benefits are super low friction, better power transfer, and increased bearing life. During the building process, we check each bearing four times by hand to ensure that all parts are matched perfectly. CeramicSpeed Balls are 400% smoother, 128% harder, and 58% lighter than standard steel bearings normally used in the bicycle industry. When comparing the CeramicSpeed Balls with other ceramic balls in the industry, you will find that the CeramicSpeed Balls are 15% harder, take 99% higher loads, and are 100% smoother. - Inner Diameter: 17mm - Outer Diameter: 30mm - Width: 7mm

Replacement Pulley Wheels for the CeramicSpeed OSPW System. Includes 2 pulley wheels. - Precision-machined aluminum pulleys - For use with CeramicSpeed's Oversized Pulley Wheel System only - Coated races increase bearing service life by increasing hardness of race and reducing corrosion - CeramicSpeed products with coated bearings include a 6-year warranty

The OSPW X for SRAM Eagle AXS features a narrow wide tooth profile to ensure durable chain retention. The 14-tooth upper and 18-tooth lower pulleys reduce chain drag, while the custom-designed carbon fiber pulley cage ensures both durability and light weight. - Pulley Wheels: CeramicSpeed 14-tooth upper and 18-tooth lower - Pulley Wheel Material: aluminum - Cage Material: Carbon-reinforced PA - Bearing Options: CeramicSpeed Standard or Coated - CeramicSpeed Grease/Oil: Pulley Oil - Compatibility: SRAM Eagle AXS (Electronic) - Compatibility Cassette: 10-52 tooth max - Spring Tension Settings: 3 - Speed: 12-speed - Discipline: Off-road and Gravity In the box: - A complete OSPW X System for SRAM Eagle AXS - CeramicSpeed Bearing Oil in a 15ml dropper bottle

Entirely developed, designed, and produced in Denmark by CeramicSpeed, the Oversized Pulley Wheel System for SRAM eTap is a huge technological advance for the cycling industry. Matching the highest quality materials with a unique design, the OSPW System delivers lower friction and longer lifetime, improving your competitive advantage. Thanks to the OSPW System for SRAM eTap, the power savings over OEM pulleys start at 40%, and the CeramicSpeed Bearings inside guarantee 3-5 times greater longevity compared to commonly used standard pulleys on the market. The watt savings with a CeramicSpeed OSPW System for SRAM eTap start at 1.6 watts. The OSPW system for SRAM eTap derailleurs is compatible with up to a 32-tooth cassette size and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12-speed SRAM eTap AXS. If you have the updated 11-speed SRAM eTap derailleur featuring the orbit clutch, you will need the CeramicSpeed OSPW System for SRAM eTap AXS derailleurs. - The overall power savings of the OSPW System for SRAM eTap commonly reach 40%-60% over a stock setup. - The oversized pulley wheels have a lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. - The OSPW system for SRAM eTap derailleurs is compatible with up to a 32-tooth cassette size and with both short cage & WiFli derailleur bodies. The product is for 11-speed eTap and is not compatible with 12 speed SRAM eTap AXS. - This 3D-printed titanium version of the OSPW System comes with our CeramicSpeed Coated Bearings for even longer service life and lower friction. In The Box: - Oversized Pulley Wheel System - CeramicSpeed Bearing Oil in 15 ml dropper bottle - Sticker sheet - IMPORTANT: When traveling, please remember to dismount your entire rear derailleur with an Allen key, as the OSPW System will not fit safely in most bike travel bags and could be damaged if left on.

This is an updated version of the 3D-Printed Ti OSPW for Shimano 9100/8000. This new design has an integrated stop tower for easier mounting. The CeramicSpeed Oversized Pulley Wheel System has been proven to be the fastest pulley system in the world, providing energy savings starting at 2.4 watts over standard Shimano systems. The OSPW System for Shimano 9100/8000 is an industry-leading product, chosen by many of the world's leading cycling teams and professional triathletes. Featuring a 13-tooth upper pulley wheel and a 19-tooth lower pulley wheel to provide absolute optimization of the rear derailleur, the upper and lower oversized aluminum pulley wheels are fitted with coated CeramicSpeed Bearings for even longer lifetime and lower friction. Please note: The 9100/8000 system is not compatible with Ultegra 8000-GS or 8050-GS (medium cage) derailleurs, nor is it compatible with clutch-equipped Ultegra RD RX800 & RX805. Please see CeramicSpeed's Shimano 11 Speed Pulley Wheels for a compatible upgrade. - The overall power savings of the OSPW System for Shimano 9100/8000 reach 30%-60%, or more in some cases, over a stock setup. - The oversized pulley wheels have 3-5 times longer lifetime than the commonly used standard pulleys on the market. - The Shimano 9100/8000 OSPW system is compatible with up to a 32-tooth cassette for both Dura Ace & Ultegra derailleurs. In The Box: - A complete 3D-printed 13-tooth/19-tooth OSPW System - CeramicSpeed Bearing Oil in 15ml dropper bottle

Chris King headsets spacers are turned from solid bar-stock to ensure precise and parallel surfaces and guarantee proper headset preload. And they look great too. Kits include a 3mm, 2x6mm, and 2x12mm, spacers.

The all new Crank Brothers Highline remote kit. - Universal mounting system: top/bottom & left/right - Single bolt hinge locking system - Infinite spherical adjustment - Compatible with: Highline and other cable-actuated dropper seatposts

Heavy duty bolt-on aluminum seatpost clamp.

Dimension Seatpost Binder Bolts - 16g

A seatpost retention plug that holds an electronic shifting system battery securely inside ENVE carbon seatposts. Electronic shifting is the gold standard and more bikes are coming equipped with these groups. Housing the battery into the seatpost is an elegant solution and a good use of space. Available in 25.4, 27.2, and 30.9/31.6mm sizes, these plugs are designed to provide excellent battery retention and interface perfectly with ENVE carbon seatposts.

A perfect complement to your ENVE cockpit and fork. The ENVE compression plug keeps your ride straight as an arrow and looking good.

Electra's Townie Quick-Release Seatpost Collar offers a little extra bling and convenience to your Townie bike because it allows no-tools seat-height adjustment. This quality metal clamp is easy to install and use and it securely fastens your seatpost in place.

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

- Grade 10 chromium steel balls

- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity - No retainer means these bearings have 40 percent more capacity

Replacement end plugs for the GA2, GA2 Fat, and GA3 grip models. - One size. - Sold as a pair. - Fits Ergon GA2, GA2 Fat and GA3 models only. - Designed to fit Trail / All-Mountain MTB handlebars on the market today.

Replacement right and left Ergon logo bar plugs. Features the Ergon logo in a vibrant white color. You have the choice of a plug set of the barend and non-barend models - Right and Left soft plastic bar plugs. - Sold as a set only. - Fits most handlebars. - Can be trimmed to fit various handlebar thicknesses. - Plug set for GP and GS grips with barends - fits GP2, GP3, GP4, GP5, GS2 and GS3 models only - Plug set for GP1, GC1 and GS1 grips - fits GP1, GC1, and GS1 only

Maximum comfort for all – We want the outstanding features of our CF Allroad Pro Carbon leaf spring seatpost on every road bike, all-road and gravel bike. This is why we offer cyclists who prefer a saddle with 7x9 oval carbon rails the Flip Head Kit compatible with oval rail clamps. The Flip Head Kit fits the straight version of the Ergon CF Allroad Pro Carbon as well as the Setback model. - Use: Allroad/Gravel/Cyclocross, Road - Weight: 20g - Clamp: for Oval Carbon Rails (7x9 mm) - Material: Aluminum

Replacement Barends for GP5 and GP5 BioKork Grips. - Note because of additional leverage of GP4 and GP5 bar ends, Ergon does not recommend using on carbon fiber handlebars - Glass fiber composite - For 2015 and newer grips

- Enhanced aerobar position performance - Long term pressure distribution - Anti-slip surface Upgrade your Profile Design aerobars to maximize your performance and enhance comfort while in the aero position. The Ergon CRT Arm Pads for Profile Design help to maintain the perfect aero position for many hours during time trials and triathlons. Made from high end OrthoCell foam, the pads prevent pressure discomforts and noticeably dampen road vibrations. The surface is slip-resistant to help you fully focus on your race!

Service parts for Fox suspension.

DPX2 Damper Shaft for FOX suspension service and repair. - FOX Damper Shaft - Steel, DPX2, 2pc, 0.360 ID, 0.498 OD, 3.155 TLG, 7.875 X 2.25/2.00

Transfer Dropper Post Remote A lightweight below-the-bar design for 1x drivetrains. FOX Transfer post levers provide smooth action and reduced force, providing consistent actuation pressure to raise or lower the seat. - 22.2 1x Remote I-Spec EV

Stainless steel pedal washers - Sold in pairs

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

FSA Mega Exo Small Parts.

FSA Service Parts for BB30 Frames

ISIS cranks have been around a long time, and they're still a great design. If you've got one, keep it in top working condition with these quality crank bolts from FSA. - ISIS-compatible - M12

Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

This is an FSA MegaExo Crank Arm Bolt for 24mm MegaExo alloy cranks - Designed to fit alloy FSA cranks only - Includes M17 bolt, M27 self-extracting cap, and washers

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

FSA (Full Speed Ahead) Polycarbonate Headset Stack Spacers

FSA Crank Arm Fixing Bolts - Self-extracting crank bolt - 15mm

FSA Standard Headset Bearings

- Mega Exo right hand threaded (RH) hollow carbon screws with a self-extracting cap - Designed to fit FSA MegaExo Cranks only - Includes bolt, self-extracting cap, and washers

Replacement headset bearings from FSA. - Compatible with most Trek MTB integrated headset systems - Sealed bearing for long life - Compatible with Knock Block Headsets

FSA (Full Speed Ahead) Chainring Bolts

FSA Standard Headset Bearings

FSA bearings that set directly into the frame without the use of pressed in cups. - 36/45 degrees is Cane Creek-compatible - 45/45 degrees is Campagnolo-compatible

If your plan is to install a 386EVO crank into a PF30A or BB30A Cannondale frame, look no further. This adapter from FSA is just what you need.

FSA Service Parts for BB30 Frames