Wheels

Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender

Whisky Parts Co. Tubeless Rim Tape.

The Problem Solvers Axle Nut is perfect for wheels with solid axles (also called bolt-on axles). This quality nut is made of durable chrome-plated steel and features a built-in integrated rotating washer to hold tight.

High quality sealed bearing hub is available in traditional and modern configurations. - Steel axle, aluminum end caps with steel knurled contact surfaces - Same proven driver mechanism as higher priced models - Spoke Interface: J-Bend - Hub/Brake Compatibility: 6-Bolt Disc - Skewer Included: No - Bearing Type: Sealed Cartridge

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 716 front hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. TPlus, tough cartridge bearings roll smooth for the long haul.

Whether your joy comes from barreling downhill, or tearing up to the top, SRAM's MTH 746 rear hub will leave a smile on your face. An aluminum hubshell with machined flanges grant the hub a low weight without compromising durability. Plus, tough cartridge bearings roll smooth for the long haul.

Equip yourself with the wheel that carried Tony Martin to a World Championship and reach the pinnacle of your own potential. Zipp’s Super-9 Carbon Clincher Disc underwent extensive fluid dynamic modeling, wind-tunnel testing, and relentless refinement so you can enjoy no-holds-barred aero domination. With a variance in width of just a single centimeter from rim to hub, the Super-9 is almost invisible to the wind. Plus the wide rim creates a virtually seamless integration with the tire, increasing aerodynamics and allowing wider tires run at a lower pressure. This diminishes rolling resistance, increases rider comfort, and reduces the chance of pinch flatting.

Freehub bodies for Zipp Cognition hubs.

What It Is The ultimate disc brake-specific, aerodynamic, lightweight road race wheelset. Who It's For The SES 5.6 Disc is optimized aerodynamically and structurally for disc use. Road cyclists and triathletes on disc brake bikes will benefit from the SES 5.6 Disc's reduced drag, lightweight design, and rim shape optimized for larger-volume road tires. Why We Made It Most "disc brake" wheelsets are simply repurposed rim brake wheels with disc hubs. The elimination of a braking surface opens up the realm of aerodynamic and structural possibilities. When you don't have to engineer a flat braking surface and manage high temperatures from braking, you can reduce the rim's weight, adjust shape for improved aerodynamics and provide better tubeless performance. Full Details Disc brake technology offers improved braking performance for amateur and professional road cyclists alike. Carbon fiber braking surfaces are a major design constraint that limits weight savings and rim design. By removing the constraints of a braking surface, we can completely rethink the shape of the rim. The SES 5.6 Disc features patented SES rim curvature, but has been further optimized for disc brakes. Additionally, the SES 5.6 Disc carbon fiber clinchers and tubulars are very lightweight, because the material used for rim brake heat management has been eliminated. This allows for a more structurally efficient and impact-resistant rim. Finally, the SES 5.6 Disc carbon clincher is road tubeless-compatible and can still be run with standard inner tubes and tires. Like the current generation SES carbon clinchers and tubulars, the 5.6 Disc has been aerodynamically optimized around 25mm tires.

Stan’s S1 wheelset line brings patented tubeless technology to an even wider range of riders. Built for long life, low maintenance, and outstanding value, the S1 series wheels feature 6061 series alloy rims and are available in six different widths suited to a wide range of tire sizes and riding styles. With an emphasis on value and durability, the S1 alloy wheelsets join a mountain wheel line-up that currently includes Stan’s successful MK3 premium alloy wheels and innovative Valor and Bravo carbon series wheelsets. While MK3 wheelsets are built to balance strength, light weight, and stiffness, S1 wheelsets focus on maximum strength and durability. The deeper profile and thicker walls of the S1 rims result in a 50-70g weight increase over MK3 rims, but offer greater impact strength for an even wider range of use. “The new S1 series wheels were developed from rims ridden in Redbull Rampage and raced on the World Cup DH circuit for years,” said Creative Director, Chris Currie. “The goal was to take everything we’ve done for tubeless technology, and put it into a truly bombproof and affordable wheel.” Designed according to Stan’s WideRight rim and tire fit system, S1 series wheelsets are available in six different rim models, with internal widths ranging from 23mm to 38mm. Combined with Stan’s low-profile, high-volume Bead Socket Technology rim design, these widths let the new S1 range accommodate tires from 2-inch to 3.5-inch. All S1 wheelsets are built with 32 spokes front and rear, Sapim’s proven Race spokes, Secure Lock brass nipples, and Stan’s faster-engaging Neo hubs. Hubs are available to fit most axle systems, including Boost. The S1 series includes reinforced versions of the classic Crest, Arch, and Flow--names already familiar to fans of Stan’s tubeless rims. In addition to the Crest S1, Arch S1, and Flow S1, three entirely new wider wheelsets will be available. The Sentry S1, Baron S1, and Major S1 bring Stan’s patented Bead Socket Technology to Plus bikes. Flow S1 Wheelset - Use: Aggressive Trail, All Mountain, Enduro, and Downhill - Internal Rim Width: 29mm - Optimal Tires Size: 2.35 to 2.8-inch - Hubs: Stan’s Neo 32-hole Front, 32-hole Rear - Spokes/Nipples: Sapim Race Black 2.0/1.8/2.0mm, Secure Lock Brass Silver Nipples - Wheel Sizes and Weights: 27.5-inch (2,034g), and 29-inch (2,134g)

Our Trainer Axle is designed to adapt your thru-axle equipped bike to on-wheel trainers, such as a 1up, Blackburn, Cyclops, Kinetic, Tacx, Wahoo, and many others. Our goal is to fit the thru-axle to your bike perfectly to minimize spacers and extra parts, providing a clean, high-performance axle for your bike. Train, warm up, and be race ready and fit for the season. - When it’s time for your race or time to head outside, simply remove your bike from the trainer, remove the drive side axle end and go. Our axle is suitable for use on or off the trainer, indoors or out. - The axle shaft and axle ends are precision CNC-machined from 7075 aluminum and hard-anodized for rugged durability. - No special tools required. Design allows for installation or wheel removal using your standard 5mm hex wrench. - Designed, built, and quality tested in the USA. Proven around the world. Important: Before you order, make sure your specific trainer will accommodate the width of your modern thru-axle-equipped bike. Measure your trainer at the widest setting and measure the outside width of your bike frame. Our the trainer axle ends will extend past your frame on each side.

From World Cup DH runs to big hits on your local trails, Shimano's Saint rear hub is the answer. Its overbuilt features, like a 12mm thru-axle, beefy flanges, and impact-resistant angular contact bearings, give you the confidence you need to go big and stick the landing. The freehub uses micro-ratchet construction for fast engagement so you can sprint out of the corners and pick up speed for that next double. It's compatible with 8-,9-, and 10-speed drivetrains and uses Shimano's Centerlock Rotor Mount to keep rotor swaps easy.

Wider and even lower in profile, the new Crest MK3 sheds weight for faster acceleration and climbing. WideRight 23mm internal width increases tire volume for improved stability with wider tires. Inspired by carbon technology, the entirely new rim shape adds strength and virtually eliminates the chance of a pinch flat. Refined over the past 15 years, Bead Socket Technology offers the most trusted tubeless seal in the business, making the Crest MK3 the best choice for lightweight, tubeless XC performance. - 23mm internal rim width for more stability with larger tires - Low-profile shape rolls faster, lasts longer, and helps stop tire pinch flats - Laterally stiffer and stronger for improved handling Wider but even lighter than the original Crest - More durable rim shape and alloy Most trusted tubeless system for easy setup and low maintenance - Legendary Crest climbing and speed in a high volume rim - WideRight optimized for XC tires

Not all carbon rims are created equal. If your carbon rim is too stiff, you're losing speed and risking tire pinch flats. The Stan’s Crest CB7 rim with RiACT absorbs radial vibrations and damps impacts. It's a difference you can feel in the ride of the bike almost instantly. First introduced with Stan's legendary Valor rim, Stan's impact-absorbing RiACT technology has evolved to be more responsive and even more durable. The Crest CB7's new layup and rim shape allows for 10mm of radial compliance to absorb larger impacts. The new rim also matches the Valor's strength while using less material to save weight. And when it comes to the lateral stiffness needed for steering precision and control, the new CB7 layup delivers. Wider than the original Valor while still optimized for XC tire widths, the Crest CB7 keeps you in control and rolling faster. Stan’s backs up the technology in every Crest CB7 rim with one of the best warranties available, including lifetime crash replacement. Better by design, the Crest CB7 is the most advanced rim available for creating a lighter, stronger, more reliable, and faster rolling wheelset. - Designed for cross country racing and riding - Patented low-profile sidewalls and 23mm internal rim width - Ultra-light 325g (29") rim weight - RiACT system absorbs impacts and rolls faster - Bead Socket Technology for easier tubeless setup and the best reliability - WideRight rim design optimized for 2.00 - 2.25-inch tires

Do you need to replace the right lock washer seal on your Alfine SG-S700 internally geared hub? If you're not sure, it might not be a bad idea, as contamination from damaged or worn seals is the kryptonite of virtually maintenance-free internally geared hubs.

Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!

Performance, durability, and versatility. Zipp checks all the boxes with its 30 Course Rim-brake Clincher wheelset. A wide 21mm internal rim profile delivers speed, stability and comfort over a variety of surfaces, and Zipp's 71/177 hubset provides smooth and efficient power transfer. Sapim CX-Ray spokes and redesigned ergonomic skewers round out this excellent all-around package. Each wheel includes rim tape, a tubeless valve, and a 1.85mm spacer for use with 10-speed cassettes.

Shimano XT FH-M8010/M8000 Rear Hubs. - Double contact bearing seals - Super polished bearing races for low friction rolling - Shimano Quick-engagement freehub - Not compatible with Shimano 11-Speed Road cassettes - Cone bearings races ground by a Cubic Boron Nitride tool for smooth-rolling durability - Center Lock disc brakes provide reliable braking power (lockring sold separately)

The lightweight Dura-Ace C40 Carbon Clincher wheel is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheel has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - Responsive acceleration - Wide section rim - Carbon laminate rim

With simple setup and reliable trail performance, the Shimano Deore XT 8100 front hub is perfect for custom MTB wheel builds. - Easy disc brake rotor installation with Center Lock spline mount and lock ring - Tool-less 15mm thru axle system optimizes rigidity and weight - Simple setup and reliable trail performance

The Shimano HB-RS470 front disc brake hub features a Center Lock design, Internal Grease Sleeve, and Cup and Cone Bearing technology. - The Center Lock system makes for easy rotor installation with a quick and secure spline mount and lock ring - Hub features internal o-rings and a grease sleeve that helps maintain grease levels and increases service life

Internal O-rings, a grease sleeve, and high-quality cup and cone bearings lend this 105-level hub high durability and smooth rolling. - Internal O-rings and grease sleeve - High quality, sealed Cup & Cone Bearing - High durability and smooth rolling for sustained performance

The lightweight Dura-Ace C40 Carbon Tubular wheel is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheel has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - Responsive acceleration - Wide section rim - Carbon laminate rim

With Shimano's Dura-Ace C24 series carbon clincher laminate wheel, you’ll experience a faster, smoother and more responsive ride. Expect to out-accelerate and out-climb the competition. It boasts increased rigidity for improved drivetrain efficiency and lightweight titanium hubs for reduced friction. - 24mm rim depth - Wider hub flanges for increased stiffness - Clincher - Responsive acceleration - Carbon laminate rim

Shimano's Dura-Ace C24 series carbon clincher laminate wheelset, you’ll experience a faster, smoother and more responsive ride. Expect to out-accelerate and out-climb the competition. It boasts increased rigidity for improved drivetrain efficiency and lightweight titanium hubs for reduced friction. - 24mm rim depth - Wider hub flanges for increased stiffness - Clincher - Responsive acceleration - Carbon laminate rim

The lightweight Dura-Ace C40 Carbon Tubeless disc-brake wheelset is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheelset has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim - Tubeless - Center-lock Disc - E-thru axles

The lightweight Dura-Ace C40 Carbon Tubular disc-brake wheel is the ultimate all-rounder. Yet, it’s still aero thanks to the wide rim you’ll see at the C40. This carbon wheel has an increase in rigidity for improved aerodynamic performance, while maintaining a comfortable riding experience. Its braking, handling and acceleration are top notch. - For the performance driven triathlete and road racer - Wide section rim - Ultra-light full carbon rim - Tubular-specific rims - Center-lock Disc - E-thru axles

Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S7000 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S7000-8

Disc design for maximizing aerodynamic efficiency. - Carbon and rohacel sandwich construction - 2x2 3K Twill weave pattern with matte coating - Ultegra 6800 HUB (11-speed compatible) - Oval cut-out suitable for longer valves - Includes PRO wheelbag and valve extensions - Weight: 1330g

These die-cut borderless decals provide a distinctive look to go with the distinctive sound and aero-advantage of Zipp wheels rolling at 45km an hour. Zipp’s Matte white and Matte black decals also are still available. Each decal kit has seven decals sufficient to cover one wheel and two matching valve-hole decals. Note: Before applying the decals, make sure the rim surface is free of dirt and debris. We recommend a gentle wipe with acetone or rubbing alcohol. Peel the white backing sheet from the decal, orientate, position and gently press the decal onto the rim surface. Starting at one end, remove the surface clear cover slip and then work the decal into the dimples using a 3M squeegee.