Components

- Standard metric-sized Stainless steel washers - 100 per tub

Developed for short spokes with a large deflection angle. DT Pro Head nipples are designed for short spokes with a large angle of deflection, such as for e-bike use. Through the spherical contact surface, the nipple aligns automatically with the angle of the spoke, which leads to consistent power transmission. Note: brass nipples are not approved for children's products in the USA. See attached warning! All-brass nipples are recommended for e-bike use. - Weight: starting at 59g for 64 nipples.

Designed for maximum comfort, ergonomics, & durability - Bag of 10

The buyer's choice for wheel builders looking to save weight. The nipples are available with or without DT Pro Lock, a patented liquid inside the nipple thread that makes the connection between the nipple and spoke extremely durable. It pairs perfectly with any wheel, though all-brass nipples are recommended for e-bike use. - Weight: starting at 20g for 64 nipples

- Aheadset preload adjusting bolt

- Allows quick chain removal without tools - MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~| - MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~| - MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~| - MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~| - MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~| - MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~| - MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

- Used between the caliper and fork/Frame mount to space the disc brake caliper to the correct rotor plane

- Anodized aluminum - 50 nipples per bag - 12mm length

- 8x1mm Allen head

Hose fittings for Hayes hydraulic disc brakes available a la carte. Hayes brake compatibility: - HFX-9 - Prime - Sole - El Camino - Radar

- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension - Uses standard chain pin connector and tool

Wheels Manufacturing 1-1/8 4-Piece Headset Spacer Kit includes an assortment of black anodized aluminum headset spacers for 1-1/8" fork steerers. Includes one each: - 2.5mm - 5mm - 7.5mm - 10mm

Stainless steel pedal washers - Sold in pairs

M5 bolts to mount your flat mount caliper to the frame. Sold as a QTY of 2.

- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack

- Prime 2-piece rotors are for Prime Pro and Expert brakes only - L-series, lightweight one piece rotors - V-cut profile steel rotors for optimum weight-to-performance ratio. Increased surface area over previous designs increases power while cutouts and drillings help keep pads clean - Rotors includes: (1) 6-bolt/44mmBCD rotor, (1) Torx wrench, and (6) T-25 rotor mounting bolts with thread retaining compound - 205g @ 203mm

- Prevents pads from becoming dislodged from pistons when transported without rotor inserted in caliper - Sold (10) per bag

- Aluminum w/lock nut and mount - Slotted mount design

- For square taper and flanged. - Fits most cartridge BBs - Shell: 8mm Flanged axle bolt

Replacement Axle nuts for three speed Sturmey Archer hubs.

- Stainless steel shim helps center the rotor perfectly within the disc brake caliper - Great for swapping wheelsets without the threat of brake drag

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

Champion 2.0 Black Spokes - One 264mm spoke = 7g

- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.

- One-piece steel construction - Chrome plated

- Fits cantilever brakes - Sold individually

- Cold forged 2.0mm 304 stainless steel with rolled threads - Nipples sold separately - 213g (32 spokes @ 262mm) - Bag of 50

- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately

This is one of the most versatile spokes in the DT Swiss spoke range. DT competition gets its special strength from cold forging. This makes an extremely durable spoke and thanks to the thinner middle section, it is 48 g lighter (per 64 spokes) than a spoke with a constant diameter of 1.8 mm. It is perfect for a wide range of uses, from road wheels to super light enduro MTB wheels. - Double Butted: 2.0/1.8/2.0 - One 264mm spoke = 6g - Nipples sold separately

Serfas replacement inner tubes are lightweight, durable, and affordable.

- Sunlite Cottered Pins

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

- Replacement link wire for cantilever brakes

• Replacement nut for recessed caliper brakes

- M8 Top Plate Bolt

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function

The Greenfield RetroKit is a retro-mounting kickstand plate designed with a cutaway to clear derailleur cables. - Fits all Greenfield kickstands and most generics - Made in the USA

- Top lock nut for threaded headsets - Includes water seal - Bag of 10 Lock Nuts

Power Links provide tool free chain assembly. - 8-speed width: 7.1mm - 9-speed width: 6.8mm - Chain Compatibility: SRAM - Reusable: Yes

Power links provide tool free chain assembly. - Chain Compatibility: SRAM - Reusable: No

- Alloy spacer converts an 8-speed rear hub to use a 7 speed cassette - Range: 4mm - Color: Silver

- Large Flange-Fits Splined MX Cranks - Sold in pairs

Jagwire's Road Brake Inner Wire is a high-quality brake cable made of stainless steel for excellent braking performance, corrosion resistance and durability. It comes in Campagnolo and SRAM/Shimano models and lengths to fit single and tandem bicycles.

Jagwire's Sport Slick Stainless Shift Cable is a high-quality shift cable made of stainless steel for excellent shifting performance, corrosion resistance and durability. It also comes in lengths to fit single and tandem bicycles.

- Shim adds support to presta stem used in a schrader rim

- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

FSA Service Parts for BB30 Frames

Origin-8 Plastic Cable Guides provide a quick, easy, clean routing system for your cables. Great for disc brake lines or for rear brake cable housing guides, they mount to any frame type. The plastic guide will not damage the frame and no need to worry about corrosion. - Zip ties to frame - 2 per package

The Problem Solvers Clamp-On Water Bottle Cage Mount makes it easy to carry a bottle on your handlebars so you can have even more refreshment on rides. It also comes in useful on frames without room for bottles, like smaller frames and some kid’s bikes.

- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 139g (32/265mm) - Box of 20 - Nipples sold separately

Improve the performance and set up of your V-brakes with Origin-8's V-Brake Barrel Adjuster Noodle. Standard 90° stainless steel noodle with built-in barrel adjuster for precise brake cable adjustment. Compatible with most V-brake systems.

Bottom bracket cup and spindle spacers for adjusting chainline or bearing play.

- Standard 1mm tube thickness - Presta valve

Kenda Presta valve tubes are dependable replacements. Use them to build up your bike, and throw a spare in your bag so you can keep on riding.

- Standard 1mm tube thickness - Schrader valve

- Butyl rubber - Economy tube - Wall thickness: 0.9mm - Removable valve core

- With plastic washers - Shell: 8mm Allen head axle bolt

- Eady to install - Spoke mounted - 2 per set

- Valve type: Schrader - Valve core: Removable - Valve stem: Smooth - Butyl rubber - Wall thickness: 0.9mm

Aluminum headset stack spacers precision cut to ensure proper headset function. - Precision cut for proper function