Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Wheels

Bkool Thru Axle Adapter
$60.00
The 12x142x1mm thru axle adapter will allow you to use your bike with any Bkool trainer. Note: This kit is for 142x12 bikes only. Not compatible with 135x12, 148x12, or any other thru-axle system. Frames come in 3 thread pitches: fine, medium, and coarse. Please check with your frame manufacturer for the proper thru axle.
Bontrager Ceramic Bearings
$40.17 - $69.99
• Grade 3 balls and magnetite rust proof finish • Abec 5 precision and silicone w seals • 3 times cryogenic race treatment • Bearings sold individually, not as pair
DT Swiss Champion 14g Black Spokes
$3.00
- Straight gauge 2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads. Black surface treatment resists scratches - 222g @ 32h/265mm - Box of 72 - Nipples sold separately
DT Swiss Competition 14/15/14g (Silver) Spoke
$3.00
- Double butted 2.0/1.8/2.0mm with cold forging technology - Chrome nickel stainless steel with rolled threads - 192g @ 32h/265mm - Box of 100 - Nipples sold separately
DT Swiss Aerolite 14/19/14g (Black) Spoke
$6.00
- Bladed Revolution spokes 2.0/.09x2.3/2.0mm, black surface treatment resists scratches - Cold forging technology, CrNi stainless steel with rolled threads - No hub slotting necessary - 139g (32/265mm) - Box of 20 - Nipples sold separately
Delta Axlerodz Bolt-On Skewers
$14.99
- Extra security against theft - 5mm hex CrMo axle
Delta Knoxnuts Security Skewers
$39.99
If wheel theft could be a problem, then these high-grade locking skewers and nuts will challenge even the most determined thieves. The KnoxNut features a one-of-a-kind nut protected by a super-tough free-floating outer ring, making it impossible to release your wheel with anything other than the special key. KnoxNuts can be installed on existing skewers or combined with the KnoxNut Skewer, a unique and unobtrusive blind-head cromoly skewer. The special forged key is lightweight and easy to carry. Use with regular 6mm allen key to unlock. All keys are marked with a unique serial number and replacement keys are only sold to consumers that have previously registered a key on deltacycle.com. Set Includes: - Front blind-head skewer with KnoxNut - Rear blind-head skewer with KnoxNut
Easton Haven Front Wheel
$445.00
Bring out the best in your all-mountain rig with Easton's Haven wheels. They're burly enough to let you hang it out on the downs and light enough to crush your buddies on the ups, too. These hand-built hoops also have oversize sealed bearings and they're UST compatible for simple tubeless setup. Plus, Easton's 26mm-wide aluminum rims let you roll fat knobbies so you can rail turns with abandon.
Easton Haven Rear Wheel
$500.00
Bring out the best in your all-mountain rig with Easton's Haven wheels. They're burly enough to let you hang it out on the downs and light enough to crush your buddies on the ups, too. These hand-built hoops also have oversize sealed bearings and they're UST compatible for simple tubeless setup. Plus, Easton's 26mm-wide aluminum rims let you roll fat knobbies so you can rail turns with abandon.
Odyssey HGS Spokes
$2.50
- Straight gauge spokes with a proprietary grade of stainless steel that is as good or better than the materials used by the world’s most renowned spoke makers. - Sized and dimensioned specifically for BMX.
Pro 3-Spoke Clincher Ultegra Front Wheel
$1,899.99
The Pro 3-spoke front clincher wheel is ideal for triathletes, time trial cyclists, and any discipline that seeks to maximize aerodynamic efficiency. - 2x2 3K Twill weave pattern with matte coating - Aluminum Rim - Ultegra 6800 HUB - Includes PRO wheelbag
Pro Disc Tubular Rear Wheel
$1,999.99
Disc design for maximizing aerodynamic efficiency. - Carbon and rohacel sandwich construction - 2x2 3K Twill weave pattern with matte coating - Ultegra 6800 HUB (11-speed compatible) - Oval cut-out suitable for longer valves - Includes PRO wheelbag and valve extensions - Weight: 1330g
Serfas Presta Valve Cores (10pcs)
$22.00
Replace your lost, damaged, or worn out Presta valve cores with one of Serfas' new Tire RX valve cores. - 10 Count Presta Core Replacements - Fits All Presta Valves
Serfas 2 Tubeless Presta Valves
$29.00 - $35.00
Switching to tubeless or in need of valve replacements? Serfas Tire RX replacement valves will do the trick. Available sizes of 32mm, 44mm, or 60mm valves with removable cores, extra valve core, and Schrader to Presta adapter with core removal tool. Please note, Due to the multi-step chemical process and variables involved in anodizing, colors may vary slightly between batches produced.
Shimano Alfine SG-S700 Right Hand Dust Cap D
$2.00
Don't let a bent or worn dust cap sully an otherwise well-functioning Shimano Alfine internally geared hub. Get a spare and replace as necessary for continued performance and to preserve the longevity that you expect from Alfine.
Shimano Alfine S7000/S700 Shift Cable Fixing Bolt Unit
$4.00
Need a Shift Cable Fixing Bolt Unit for your Alfine S7000/S700 hub? Here it is. Now, get that bike back on the road!
Shimano Alfine SG-S700 Right Lock Washer Seal
$4.00
Do you need to replace the right lock washer seal on your Alfine SG-S700 internally geared hub? If you're not sure, it might not be a bad idea, as contamination from damaged or worn seals is the kryptonite of virtually maintenance-free internally geared hubs.
Shimano Alfine SG-S700 Oil Port Bolt
$5.00
Keeping contamination out of your internally geared hub is critical to its function and longevity. Sometimes, the oil port bolt comes loose and it's easy to lose, even if you've just taken it out to oil your hub. Keep a spare or two so your hub stays clean inside and it'll last you many, many miles.
Shimano Alfine SG-S700 Right Hand Cone
$7.00
New cones make hubs spin like silk. Take advantage of your Shimano Alfine hub's highly serviceable design, and replace the bearing cones if they are worn or damaged. This one is specifically for the right side.
Shimano Alfine SG-S700 Outer Receiver Unit
$9.00
This outer receiver unit works with the CJ-S700 Cassette Joint Unit for Shimano Alfine SG-S700 internally geared hub. This part can become worn, cracked, or torn, exposing the shift cable and possibly other components to unwanted dirt, water, mud, you name it. You don't want that.
Shimano Alfine SG-S700 Left Hand Cone with Dust Cap
$10.00
If the bearings are getting rough on your Shimano Internally Geared hub, it could simply be a matter of replacing a pitted cone and repacking the bearing with grease. - Fits left side of Alfine SG-S700 hubs
Shimano 105 5800 Rear Hub Left Cone and Lock Nut Unit
$12.00
-Replacement left side cone and locknut for Shimano 105 FH-5800 rear hub
Shimano Alfine S700 Small Parts Kit
$13.99
Add an Alfine hub, cog, spokes, and a rim to this Shimano Internally Geared Hub Small Parts Kit, and you're ready to rock. - Alfine hubs are packaged without small parts and require this kit plus a cog - Nexus hubs are packaged with small parts and cogs and do not require an additional small parts kit - For 11-Speed Hub - Includes CJ-S700 Cassette Joint for Vertical Dropouts *Cassette joint does not fit Di2 Alfine hubs
Shimano Alfine S700 Cassette Joint Unit
$19.00
Shimano Nexus and Alfine Internally Geared Hub Cassette Joints - Shimano model # CJ-S700 - Does not include cable fixing bolt unit - OEM cassette joint unit for Alfine SG-S700
Shimano Deore M6000 Centerlock Front Hub
$24.99
Shimano's Deore Front Hub offers durability and fast, smooth riding. It features a high-quality cold-forged aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's easy-to-use Center Lock disc mount. The included quick-release skewer makes wheel installation and removal a breeze. - Hub/Brake Compatibility: Center-Lock Disc - Axle Type: QR - Axle Length: 100mm
Shimano Deore XT HB-M8000 Quick Release
$25.00
Shimano XT M8000 Front Hub Quick Release Skewer
Shimano Deore Rear Hub
$35.99
Build yourself a tough, no-nonsense rear wheel with Shimano's Deore Rear Hub. It features a quality cold-forged-aluminum shell, super durable angular contact bearings with high-polish bearing surfaces, and Shimano's excellent double contact sealing to seal out dirt and water. The freehub boasts quick engagement for lightning fast acceleration and confidence when negotiating tricky technical sections. A quick-release skewer makes wheel installation and removal a breeze.
Shimano Deore XT M756 6-Bolt Disc Front Hub
$38.99
Shimano XT M756 front hub. - Double contact sealing - Super polished bearing races for low friction rolling - Light alloy QR lever and nut - 6-bolt ISO disc mounting surface
Shimano Deore XT M8000 Centerlock Disc Front Hub
$38.99
Shimano XT FH-M8000/8010 Front Hubs - All-weather durability, reliable performance and lighter weight - Cone races ground by a Cubic Boron Nitride tool for smooth rolling durability - Center Lock disc brakes provide reliable braking power - Rotor lockring not included - Series: Deore XT - Disc Rotor Mount: Center Lock Disc - Axle Type: QR - Axle Length: 100mm - Axle Diameter: 14mm - Contact Sealing: Labyrinth and Contact - Spoke Holes: 32H - Center to Flange (Right): 41mm - Center to Flange (Left): 44mm
Shimano Deore XT Front Hub
$58.00
Quick Release Model • Model Number: HB-M8000 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: QR • Axle Length: 100mm • Axle Diameter: 14mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 41mm • Center to Flange (Left): 44mm 15x100mm Thru-Axle Model • Model Number: HB-M8010 • Series: DEORE XT • Disc Rotor Mount: Center Lock Disc • Axle Type: 15mm E-Thru • Axle Length: 100mm • Axle Diameter: 17.5mm • Contact Sealing: Labyrinth & Contact • Spoke Holes: 32H • Center to Flange (Right): 44mm • Center to Flange (Left): 44mm
Page 1 of 4 Next page