Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pumps/Inflation

XLAB Sonic Nut Inflation Holder
$22.95
Why have your CO2 cartridges rattling around in a seat bag when you can get Xlab's Sonic Nut Inflation Holder and store them behind your saddle? It holds two threaded CO2 cartridges and an inflator (each sold separately) in an easy-access location. The Sonic Nut is compatible with Xlab's Sonic and Turbo Wings.
Vittoria Pit Stop Tire Sealant
$16.99
You'll ride with peace of mind when you pack a can of Vittoria's Pit Stop Tire Sealant. It contains pure latex foam sealant and compressed air to quickly inflate and repair your tire so you can get on with your ride. Available in three sizes for varying tire volumes: - Road Racing: inflates 21-28-inch tubulars up to 94 psi and 700c clinchers up to 87 psi so you can ride, instead of walk to the closest pump and top off the tire to full pressure. - MTB 50 mL: Repairs and inflates low-volume MTB tires in less than a minute. - MTB Magnum 75 mL: Repairs and inflates meaty 27.5-inch tires and cross country 29-inch tires in less than a minute.
TwoFish Twofish Bikeblock Inflator Holder
$7.50
- Solution for mounting pumps and C02 inflators on frames or seatpost - Soft rubber block and Velcro loops hold pumps tightly
Topeak Presta Valve Extender XL
$9.95
Topeak's Presta Valve Extender is the perfect solution for getting to those hard-to-reach valve stems. It's precision-machined from aluminum and is designed to fit deep-dish carbon and aluminum rims that have a depth of 60 to 90mm. And, it comes with an O-ring seal to ensure a leak-free fit.
Topeak Twinhead Upgrade Kit
$26.95
Upgrade any pump to the TwinHead pump head.
Sunlite Ball Inflating Needle
$2.50
- Ball-inflating needle for footballs, basketballs and more
Sunlite Replacement Pump Hose
$8.00
- Genuine Sunlite replacement hose - Type: Fits Sunlite #4301 : 16 5.8mm"
Serfas AP-01 Air Pod
$20.00
Serfas' AP-01 is perfect for riders who want to skip the hard work. This CO2 inflator fits 12-gram threadless and threaded cartridges as well as 16-gram threaded cartridges for the ultimate in versatility. The trigger mechanism lets you perfectly control the inflation. Plus, it includes a threadless 12-gram cartridge to get you started!
Serfas FP-T1BK AIR FORCE TIER ONE Floor Pump
$25.00
Air Force Tier One floor pump Features: - Ergonomic Polymer Handle - 2" Analog Pressure Gauge (PSI/BAR) - Simple Valve Head (Presta/Schrader) - Integrated Hose Keeper - Steel Pump Barrel and Thermo Carbon Base Specs: - Color: Black w/ White Graphics - Capacity: 160 PSI - Weight: 998 Grams - Height: 25 1/4"
Serfas FP-T2 AIR FORCE TIER TWO Floor Pump
$35.00
Air Force Tier Two floor pump - Ergonomic Handle - 2.5" Analog Pressure Gauge (PSI/BAR) - Simple Valve Smart Head (Presta/Schrader) - All Metal Barrel and Base - Integrated Hose Keeper - 28 1/2" Pump Height
Serfas Combo Kit with Mini Pump
$45.00
Gear up with the CK-7 Combo Kit with compact Mini Pump. Toss a spare tube in the saddle bag and you've got everything you need to changes flats on the road. Includes: - Mini Pump - 6 Piece Mini Tool - 2 Tire Levers - Medium Saddle Bag - Ballistic Nylon Bottle Cage
Serfas FP-T3 AIR FORCE TIER THREE Floor Pump
$45.00
Air Force Tier Three floor pump - Premium Rubber Overmolded Ergonomic Handle - Top Mounted 2.5" Analog Pressure Gauge (PSI/BAR) - Larger More Stable Pump Base - Simple Valve Head (Presta/Schrader) - Integrated Hose Keeper - All Metal Barrel and Pump Base - 28 1/2" Pump Height
Serfas Tubeless System Combo Kit-Presta
$70.00
Serfas' Tubeless System Combo Kit offers the ultimate kit to go tubeless! Tire Medic Sealant and tubeless rim tape let you seal up your regular clincher rims so you can enjoy superior ride quality. Included in the kit is two Presta valves with removable cores, extra valve core, Presta to Schrader adapter and two fill fill tubes. There has never been a better time to go tubeless! - compatible with Presta valves - includes: two 125ml sealant bottles, rim tape for two wheels with inner width of 15-17mm, Presta to Schrader adapter, two fill tubes, two Presta valves with removable cores, Presta key & extra valve core - sealant is CO2 compatible - sealant will not freeze
SKS EVA Pump Head Grommets
$4.25
Bag of 3 replacement washers for EVA heads on all SKS floor pumps
SKS Pump Adapter with Chain
$7.99
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
SKS Digital Airchecker
$24.99
The Airchecker from SKS is a fast and easy way to check your tire pressure. The swiveling head makes it a snap to reach your presta or schrader valve stem at any angle, and the backlit display with extra-large LED digits is always easy to read. This gauge measures up to 144 psi and reads in 10ths of psi.
SKS TL-Head Set
$32.99
The TL-Head Set pump head is a new solution from SKS for all tubeless tire inflation. It is compatible with SKS floor pumps and all others with a 5.0-5.7mm hose size. The TL-Head Set can be used both for conventional pumping and with CO2 cartridges for a simple seating of tubeless tires. It comes in a practical set containing 2 tire levers and 2 16g CO2 cartridges. - Includes TL-Head, two 216g threaded cartridges and two tire levers - Compatible with Presta, Schrader and Dunlop valves
SKS RideAir
$69.99
The SKS RideAir is the first refillable air tank from SKS for when you are on the road. It can be used in place of a pump or C02 cartridges emergency tire repairs. The RideAir effortlessly fills your tires in seconds. Simply refill the canister at home using your floor pump. This simple and environmentally friendly solution can be safely transported in your bottle cage. The RideAir is also a must have for tubeless tire riders: it saves space and sets up almost all tubeless tires. - Fits in a standard water bottle cage - Fills from an air compressor or high pressure pump via a Schrader valve - For tire inflation, fits to Presta, Schrader or Dunlop valves - Integrated canister pressure gauge
Profile Design CO2 Mounting Bracket
$16.99
Profile Design's CO2 Mounting Bracket is a small, light holder that attaches to any Profile rear-mounted drink system or under any bottle cage. Once in place, the bracket provides a handy place to carry a CO2 refill cartridge for your CO2 inflator (Profile drink system, bottles, CO2 cartridges and inflators sold separately).
Problem Solvers 90 Degree Presta Valve Inflator for disc wheels
$14.99
Problem Solvers 90 degree Presta valve inflator is used to inflate disc wheels, thanks to its narrow, low-profile head. • Presta valve • 90 degree inflator works with most pump heads
Pro Touring Minipump
$12.99 - $16.99
• Lightweight and compact mini pump • For both schrader and presta valves • Maximum pressure up to 11Bar / 160PSI • Magnet lock system • Glass fiber reinforced Nylon material • Colour: Black
Pro Micro C02 Inflator
$19.99
- Super compact and minimalistic design - Easy to use with the controllable internal spring valve system - Reliable system for quick and easy inflation - Includes one 16g threaded Co2 cartridge - Presta and Schrader compatible
Pro Pressure Checker Digital
$25.99
The Pro Digital Pressure Checker makes it easy to ride with optimal pressure with highly accurate readings. - Pressure release button for fine tuning - Measures from 0 to 11 bars (0 to 160psi) - For both Schrader (without brass insert) and Presta valves
Pro Team Digital Floorpump
$119.99
The Pro Team Digital floorpump features a digital gauge for easy pressure reading. Its alloy barrel provides durability, while the wooden handle offers comfortable ergonomics as well as a touch of class. - Presta and Schrader compatible - Snaplock EZ head
Prestacycle Presta Head Rubber Gasket
$2.95
Prestacycle redesigned the Presta Grommet in May 2012 to fit to modern standards. PRestacycle's design works so well, it’s been copied by others including major floor pump makers. Prestacycle's design engages the Presta valve just below the cap threads and requires less insertion. The head is now very easy to get on and off, and gives a nice “click” feeling when it’s installed in the right position. Safe for all types of Presta valves, including tubeless and tubeless-conversion valves. Will not harm newer lightweight performance valves. Fits all Prestaflator BIG Push/pull Presta heads. Also fits all Silca pump heads that use the 24.1 or 242 Gasket.
Prestacycle Spin Head Rebuild Kit
$2.95
Renew all the seals in your Prestaflator spin head. These o-rings fit the seals, Plus there are five (5) Presta Valve replacement washers. Replace as needed for a good connection to your tire valve.
Prestacycle Urethane Elastomer Presta Head Gasket
$4.95 - $5.95
Prestacycle's newest version of the Presta Head Gasket uses Urethane Elastomer. It’s softer and stronger. It lasts more than 5 times longer, gives a better seal and flexes to work anywhere along the Presta shaft for better tubeless tire application.
Prestacycle Schrader Hose Barb
$5.95
Use it to upgrade your floor pump or tankless electric inflator to use Prestaflator heads and accessories. Made with 6061-T6 Alloy – Strong as Brass and only 1/3 the weight. Hose clamp not included. The correct hose clamp varies based upon the outer diameter of your pump’s hose.
Prestacycle Prestaflator Pro 3-way Presta Head Hose
$19.95
Upgrade or replace your hose! Prestacycle's red hose is made in USA from reinforced polyurethane and is 3X more flexible than their previous black hose. New Quick-Click2 + Spin-on head. 300 psi working pressure, 13 inches length. Uses standard 1/4" threads. Smooth alloy clamps for comfortable use of the spinner head and corrosion resistance. Non-marring and resistant to moisture, fungi, oil, fuel, and grease as well as abrasion, impact, and tearing. Operating temperature range is from -90° to +175°F. Fits all previous Prestaflator tools, o-ring included.
Prestacycle Pump Upgrade/Repair Hose
$24.95
- Allows you to upgrade floor pumps to accept Prestacycle attachments - Spin-On presta head with pressure release option, USA-made 36" hose and hose clamp are included
Page 1 of 3 Next page